
Saturday, December 13, 2008
A Pattern: Fun and Funky Eyeglass Cases

Saturday, November 1, 2008
A Pattern: Little Striped Ascot

This delicate little ascot uses up some very small amounts of pretty yarns The yarns should be similar in weight, but need not be identical. I used a cream colored fingering weight wool and a black, somewhat slubby mohair blend, less than one ounce of each.
Materials: Leftover ball-ends of two light yarns (#2), or two sport weight yarns (#3). US#4 needles for lighter yarn, #5 for sport yarn.
One shank style vintage button. 6" of elastic cord.
Directions: CO 25 for light, 21 for heavier weight. (Or any odd number for wider or narrower scarf. This one is 5" wide.)
Pattern: In color A, Kl, P1, ending with K1. Row 2: Sl1, *P1, K1* to end.
Drop A and pick up B. Continue in pattern, carrying unused row up side to change color every two rows.
Note: The edge where the yarn is carried will be tighter and have a different appearance than the other edge. When you Sl1 at the beginning of the "return" row, this will equalize the tension and the appearance. That's why you must Sl1 on this row and not the other.
Work in stripes until scarf is about 32". BO in pattern after two rows of color A are completed. Steam lightly. Thread elastic through button and tie around scarf about 5" from the end. Trim end of elastic.
Monday, October 20, 2008
A Pattern: Pink Hodge-Podge Scarf

Pink Hodge-Podge Scarf
Materials: Eight to ten different yarns in the same color family. Mine range from a very pale pink to a burgundy. At least two must be worsted weight, and one of these is used for the "binder" yarn. The others should be a range of weights from thin to bulky, and at least one should be a boucle or have other textural interest. I used yarns containing acrylic, wool, alpaca, mohair, nylon, cotton, and lurex. One was a fun-fur type, with slubs, and two had metallic threads.
US#10 circular needle, 36" or longer.
Note: This scarf has absolutely no finishing or weaving in ends, as the fringe is created during the knitting process.
Instructions: With "binder" worsted (here, I used a rose colored worsted), CO 220 st. Knit two rows. Cut yarn, leaving an 8" tail. Attach novelty yarn, leaving an 8" tail.
Work rows of one yarn for each row, in garter stitch, knotting new yarn leaving tail for fringe. Work one row of worsted between each novelty yarn for stability. Every inch, work two rows of worsted instead of one row, so the novelty yarns will not create a "right" side and a "wrong" side on the scarf. Each row takes about 4-5 yards of fiber. Use each yarn as many times as you wish. Here, I used the burgundy only twice, so the darker color would not overpower the lighter colors.
Continue working rows in garter stitch until scarf is as wide as you desire. Note that the fabric will stretch sideways, making the final scarf wider than it looks on the needles. My scarf is 7" wide and six feet long.
Finish with two rows of the base yarn, then BO LOOSELY in garter stitch.
Your scarf is done! Trim the fringe a little to make it fairly even, leaving it a little long and ragged.

I took the various yarns and filled in any empty spots with fringe, as the double worsted rows left some empty spaces.
Despite using some bulky yarns and some very thin yarns, the scarf turns out uniform and straight.
Thanks to Denise for giving me this idea for using up my pink yarns.
Friday, October 10, 2008
A Pattern: Gossamer Lace Scarf

Lace Scarf, recycled yarn from frogged project
This scarf is so light and airy that it almost floats off the chair. It's 10" wide by 4 feet long, and took only 250 yards of yarn.
Materials: 250 yds of thin yarn (grade 2), US6 needles for a fuzzy mohair blend, as used here. If you use a tighter yarn, you may want to use US4 or 5.
Instructions: CO 44 stitches, K three rows. Begin pattern.
Pattern:
Row1: K
Row 2: K first two, P across to last 2 st., K 2.
Row 3: *K2, YO, P1, P3tog, P1, YO*, k2.
Row 4: K2, P across to last 2 st., K2.
Repeat for desired length, or until yarn is almost gone, then K three rows. BO.
Note: There are two things with this pattern that are a little tricky. First, you will use two different methods to YO, since one YO is done before a P stitch and one before a K stitch. Next, in order to achieve the P3tog with ease, you cannot use a needle much smaller than a US4 or 5, and you should push the three stitches together on the left needle before working them. After a few pattern repeats, it should all become automatic.
This is a truly lovely scarf--silky and crushable. I hope some of you try to make it.

Stitch detail of "little shell rib" pattern.
My scarf is featured this week at One Pretty Thing, along with many other wonderful crafts. Thanks, Rachel.
Monday, September 8, 2008
A Pattern: Guy's Knit Washcloth
I tried many, many times to take a good picture of this cloth, but I just couldn't get a good shot of the texture pattern. I wanted to make a cloth for a young male relative's first apartment, and it turned out well. It's a diagonal check pattern, completely reversible, with no border and a slip-stitch edge. Fun to do, with a loop for hanging, since it's my experience that guy's don't know how to drape.I used Sugar 'n Cream--about 1.5 oz.
Pattern: Guy's Washcloth
Materials: Size 7 straight needles, worsted weight cotton, size G crochet hook for loop.
Slip all st as if to purl.
CO 37 st for smaller cloth, 42 for larger cloth.
Row !: Sl 1, *P1, K4* repeat to last st. K 1.
Row 2: Sl 1, *P3, K2* repeat to last st. K1.
Row 3: Sl 1, *P3, K2* repeat to last st. K1.
Row 4: Sl 1, *P1, K4* repeat to last st. K1.
Row 5: Sl 1, *K1, P4* repeat to last st. K1.
Row 6: Sl 1, *K3, P2* repeat to last st. K1.
Row 7: Sl1, *K3, P2* repeat to last st. K1.
Row 8: Sl 1, *K1, P4* repeat to last st. K1.
Rep these 8 rows 7 times for small cloth, 8 times for larger cloth.
BO, leaving long tail. Insert crochet hook into loop, ch 12, secure to first stitch.
Friday, September 5, 2008
A Pattern: Metallic Coin Purse in Crochet Thread

Monday, July 28, 2008
A Pattern: Little Brass Ring Purse
I had one lone six-inch diameter brass ring and wasn't sure what to do with it. This little purse uses the bottom of the ring as a frame for a little tote, and the top of the ring as the handle. I made it to hang on the handlebars of a teen-aged girl's bike, so she could carry her cellphone and a few dollars when she took bike rides. Her keys easily clip to the handle.
Materials: Brass ring, any worsted weight yarn except cotton (it must stretch over the ring tightly), size G Hook, large-eye yarn needle, velcro or magnetic snap fastener, any embellishments of your choice.
The bag is made up of two crocheted semi-circles, as shown at left. The semi-circles must be as near to the diameter of the ring as possible (here, six inches across)
Directions:
Chain 3, work 3 sc in 2nd ch from end.
Row 1: 2 sc in each stitch, turn. (6 st.)
Row 2: 2 sc in each stitch, turn. (12 st.)
Row 3: *sc in next 3 st., 2 sc in next stitch* three times (inc. of 3), turn
Row 4: *sc in next 4 st., 2 sc in next stitch* three times (inc. of 3), turn
Row 5: *sc in next 5 st., 2 sc in next stitch* three times, turn
Continue in this manner, increasing three stitches evenly in each row (you should have a fabric that looks like three pie wedges)
When piece is the desired size (mine is 12 rows), make another identical piece.
Next, holding wrong sides together, chain pieces together around the rounded edge, leaving top open. Insert ring and check fit. The join should look tidy and finished.
Remove ring and, as shown below, work three rows of sc around top of purse, decreasing one stitch at each end of each side (4 st dec in each row). Break off yarn, leaving a 20" tail.

As shown in the last picture below, inset ring into purse, thread tail onto a yarn needle, and work a running stitch just inside the ring, making a tunnel for the ring and keeping it secure in the purse. If you stitch into the hole of each stitch in turn, the stitching should be almost invisible.

Thursday, July 24, 2008
A Pattern: Dancing Stripes Washcloth
Thursday, July 17, 2008
A Pattern: One-Row Lace Summer Scarf
I made this little scarf out of two stands of bedspread cotton, but you can use any sport weight cotton, such as Grace or Cool Crochet.It's done in a modified Feather Fagot stitch. I turned the purl stitches into knit stitches, because the stiffness of the cotton caused me to drop stitches occasionally, which in a one-row pattern can be problematic with no safety net of straight K or P rows. This pattern makes a very lacy rib-looking fabric.
Instructions:
One-Row Lace Summer Scarf
CO 27 stitches on #5 or #6 needles (I used a circular needle, to give more control of the lace)
Rows 1-3: K across
Row 4: *K1, yo, K2tog* repeat to end.
Repeat row 4 until scarf is as long as desired. The scarf pictured is 40", and makes a small, ascot type of scarf.
Last three rows: K across
Finishing: The ascot type of scarf shown is gathered with a thread about 2 inches from the ends, then I wrapped the thread around the scarf and secured it. I have also made this scarf longer, and tied a knot in each end. You can also use fringe, if that is your preference, but the fringe should be quite long. Of course, it's nice just plain with no finishing at all.
This is fun to make! I hope you try it.
Thursday, June 26, 2008
A Pattern: Farrow Rib Hat

This is my standard "cool guy" hat, because teen boys will actually wear it. If you're looking for a hat that can be pulled down to the eyebrows and worn day and night, this is for you. It looks best in two dark colors---such as brown and navy or black. Here, I made the top in beige so the pattern can be seen. The ribbing allows for very easy decreasing at the crown, with no counting.
Farrow Rib makes a thick fabric and is very stretchy. This pattern will stretch from 20 inches to about 26 inches. If you want a smaller hat, the pattern can easily be reduced by any multiple of three.
Farrow Rib Hat
Worsted weight yarn scraps (I used about 1 oz. of Woolease in two colors)
Gauge: 20 stitches to 4".#7 circular needle, changing to #7 DPNs
CO 84 stitches, begin round 1 with a careful, untwisted, join
Round 1: *K2, P1* repeat to end of round, mark end.
Round 2:: *K1,P2* repeat to end of round.
Repeat these two rows for eight inches, changing color at four inches, or whenever you wish.
Decrease Round: *K1,P2tog* (you are changing farrow rib to a simple K1,P1 rib) to end.

Work three rounds of K1,P1 ribbing.
Decrease Round: *K2tog* (changing ribbing to stockinette)
Work three rounds.
Decrease Round: *K2 tog* to end of round.
Work three rounds.
Decrease Round: *K2tog*.
Work one additional round.
Break off yarn, leaving an 18" tail. Thread yarn and needle and through all stitches remaining. Pull tightly. Thread yarn again through stitches, pull tightly. Move yarn to inside of hat and secure.
Monday, June 16, 2008
A Pattern: Cotton Thread Neckerchief

Mattie's Cotton Neckerchief
Materials: #10 bedspread cotton and #1 straight needles (you'll need less than a ball)
CO 4 stitches
Row 1: K
Row 2: K2, YO, K to last stitch. K last stitch in the back of the stitch.
Repeat Row 2 until length from point is 10 inches.
Headband section:
Row 1: K across
Row2: K
Row 3: K2, *YO, K2T* to last two stitches, K2
Rows 4 and 5: K
Bind off.
Ties: Pick up five stitches along side edges of "headband" section and K for 12 inches or desired length. (You can taper the ends if desired by knitting two stitches together at the beginning of two rows, then binding off the last stitches.)
This looks great either tied around the hair or tied at the back of the neck to fill in a sweater or shirt's neckline.




